Maintenance and proper use of the automatic flute laminator
if the flute laminator adjustment or improper maintenance, also easy to cause the bottom paper and corrugated board mounting errors, The main reasons include:
The paper feed chain mechanism is loose, so that the upper and lower chains work isn’t consistent or unstable;feed gate of the upper and lower chain appears loose, and the impact phenomenon is generated when the paper is sent to the paper edge. Pressure bar  across the liner paper contact position discomfort or gap is too large, so it can’t  to slow down the board of high-speed moving inertia momentum effect.
For the new machine, if the factory is limited by its own technical conditions, can not train production operators, equipment suppliers should be asked to send technical personnel on-site training, to ensure that the machine can get the correct use. In the breaking-in period , production rates  don't drive too fast,in general control in 3000 / hour。the process of equipment test, it should be noted that through the " observe, smell, touch" and other methods to check whether the normal state. “observe” is to pay attention to look at the working state of the components, whether the action is abnormal;“smell”, is to pay attention to listen to the machine there is no abnormal sound; “Touch” is just running for a period of time, you should stop it to touch  some of the rotating shaft, gear and other rotating partsat at the right moment, whether there is a  obvious warming, If found abnormal phenomenon, should be  shut down for inspection immediately and solved it in time.In the process of using, must be strictly in accordance with the requirements of the equipment  operation, and do a good job of lubrication and regular maintenance work, which is to ensure that the equipment to maintain good accuracy, improve production efficiency and quality of the effective guarantee.